 |
|
|
|
|
Brake Control Wire
Kit Sold Separately
|
|
In the case of an overload,
caused by either a short or low power supply, the Brakeman
Digital will display an overload warning. All Reese
Brakeman brake controls are covered by additional circuit
protection. They will not be damaged if the black and
white wires are reversed, or in the event of a short, if no
ground or poor ground exists.
To compensate for trailer
load changes and driver preferences, adjustments can be made
using the sync slide control located on the side of the
unit. The driver can control the rate of brake application
from soft to aggressive by simply moving this control forward or
backward. Since the unit has no moving parts or pendulums
to d\adjust, it can be mounted in virtually any position.
Mounting bracket and hardware are included.
Its slim design and contoured
shape are combined to provide more under-dash clearance than
most brake controls on the market today. Trailer
brakes may be manually applied by squeezing the manual control,
located on the front of both units. This control also
triggers the trailer and tow vehicle's stop lights when brakes
are applied.
Timed Brake
Controls
Reese's timed brake controls
are great choices for your basic economical light-duty towing
needs. These time actuated controls have solid state
electronics and can be mounted in any position - horizontal,
vertical, even turned upside down.
|
|
Features
|
•
2,4,6 & 8 brake systems
•
Digital output indicator
•
Overload indicator
•
No Moving Parts
. |
|
•
Compatible w/anti-lock braking systems
•
No leveling requires
•
Full Lifetime Warranty |
|
|
|
|
|
Brake Control Accessories
|
|
|
|
Brake
Mate Kit
|
119606 |
119607 |
|
Includes all
necessary parts required to completely install all brake controls.
No other parts are necessary.
Each BRAKE MATE™ KIT includes:
•
Pre-wired 6/7 way round connector
• Heavy duty breakers
• 4 pole flat car end • Scotch locks
• Ring connectors • Heavy duty flasher
• Self taping screws • Tie straps
|
|
|
Part
#
|
Description
|
Price
|
Buy
Now |
|
119606
|
Pre-Wired
Brake Mate™ Kit Adapter, 6-Way Round Pin Connector w/Brake
Control Wiring Installation Kit
|
$49.45
|
|
|
119607
|
7
Way Brake MateTM Kit – Flat Pin
|
$49.45
|
|
|
|
|
|
|
|
|
|
|
BRAKE CONTROLLER INSTALL KITS
(without 6/7
way connecters)
|
|
|
|
Part #
|
Description
|
Price
|
Buy Now |
|
20505
|
Wiring Kit For 2 – 4 Brake Control Systems,
Includes 25' 12-2 Duplex Wire,
20 Amp Circuit Breaker and Attaching Terminals
|
$25.25
|
|
|
20506
|
Wiring
Kit For 6 – 9 Brake Control Systems,
Includes 25' 10-2 Duplex Wire,
30 Amp Circuit Breaker and Attaching Terminals
|
$49.45
|
|
|
|
|
|
|
|
|
|
|
|
PULSE
PREVENTER
|
|
 |
Immunizes against the effects of 4 way flashers on some brake
controls.
|
|
|
Part #
|
Description
|
Price
|
Buy Now |
|
20501
|
Pulse Preventer
|
$20.02
|
|
|
|
|
|
|
|
|
|
BATTERY
ISOLATION SOLENOID
|
|
 |
Battery Isolation solenoids are used to switch the auxiliary 12v
feed off when the ignition is off.
|
|
|
Part #
|
Description
|
Price
|
Buy Now |
|
118665 |
Battery Isolation Solenoid, 3 Pole, 12 Volt (Chassis Ground)
|
$15.12 |
|
|
|
|
|
|
|
|
|
UNIVERSAL
BATTERY CONNECTORS
|
|
|
|
Part #
|
Description
|
Price
|
Buy Now |
|
119630 |
Side Post, 1-3/4" short side terminal |
$7.65 |
|
|
119631 |
Side Post, 1-3/16" long side terminal |
$7.65 |
|
|
119632 |
Top Post, 1-7/16" top post terminal |
$7.65 |
|
|
119633 |
Tap/Ground Kit, top mount with 22-10 gauge terminals |
$CALL
|
|
|
119634 |
Tap/Ground Kit, side mount with 22-16 gauge terminals |
$CALL |
|
|
|
|
|
|
|
|
|
|
|
 |
